AR-15 Items:
*
| Complete Upper Assemblies |
| |
*
* LOWER RECEIVER PARTS
 AR-15A1 Buttplate, new $6.95 each AR-A1-Buttplate |
 AR-15A2 Buttplate, new $6.95 each AR-A2 Buttplate |
 AR-15A1 Lower Buttplate Screw, New $5.95 each AR-A1-Lower Buttplate Screw |
| AR-15A2 Lower Buttstock Screw, New $2.95 each AR-A2-Lower Buttplate Screw |
 AR-15A1 Upper Buttstock screw, vented, new $3.95 each AR-A1 Upper Buttplate Screw |
| AR-A2 Upper Buttplate Screw |
 AR-15A1/A2 Rear Sling Swivel, new $3.50 each AR-A1/A2 Rear Sling Swivel |
 AR-15A1/A2 Buttstock Door Assy, new $19.95 each AR-A1/A2 Buttstock Door Assy |
 AR-15A1/A, Buttstock Door Hinge, new $3.95 each AR-A1/A2 Buttstock Door Hinge |
 AR-15A1/A2 Buttstock Door Hinge Pin, New $1.95 each AR-A1/A2 Buttstock Door Hinge Pin |
 AR-15A2 Rifle Buffer Tube, MILSPEC, new $15.00 each AR-15A-Buffer Tube |
| |
*
 SP-1 Type Flash Hider. Fits AR-15 and M16 Rifles. This is the original type flash hider that was used on the M16 rifles, but replaced when service in Vietnam showed that the open 3-prong design was prone to catching on vines and twigs in the jungle. $12.95 each FH-SP1 |
*
AR-15 / M16 Magazine Rebuild kit. Three no-jam Green MILSPEC followers and three 30-rd magazine springs. $9.95 each Part Number AR-ARK |
*
AR-15 Pin kit, New, Complete. $17.25 |
*
|
M16A1 Flash Hider and lock washer. Initial "birdcage" Flashhider used on the M16 and M16A1 rifles. Six evenly spaced slots. Does not need to be indexed, so the standard lock washer is used. Both Flash hider and lock washer are new, unissued condition. $8.95 |
*
AR-15 Buttstock Cleaning kit. Condition is new. $15.95 |
*
| AR-15 / M16 Magazines |
|
AR-15 4th Generation 30rd Magazine, Various manufacturers (CF Products Contract mag shown), Mag-Pul no Tilt Follower, New $24.95 each MAG-AR-30-GI Contract |
*
AR-15 Accuwedge. Eliminates play between the upper and lower receiver. Photo shows a red one installed in my personal AR-15. New. $4.95 each AR-accuwedge |
*
*
| AR-15 / M16 Flash Hiders and Muzzle Covers |
|
AR-15 Barrel Boot. Neoprene sleeve that slides over the A2 flash hider to keep out dust and debris. Works great on target bull barrels as well to protect the important crown. Condition is new. $9.95 AR-Barrel Boot |
*
M16 Muzzle cover, USGI. Available in red and black. Designed for A2 flash hiders. May be safely shot through if necessary. Condition is new. $1.50 each Black | |||
*
Muzzle Cover, Red $1.50 |
*
AR-15 Sight protectors. Condition is new. $18.50 |
*
AR-15 Sling with hardware, New. $6.95 |
*
USGI Contract item. M16 Flash Hider Crush Washer. Fits AR-15 Also. New. $2.99 |
*
M16A1 Early type sling with hardware, New. These were replaced immediately after issue becasue the metal hardware was too noisy in Vietnam. If you like the early SP1 look and are not heading into combat, this is the sling for you. $12.95 |
*
AR15 Spring kit, DPMS, New $9.95 |
*
M16A2 Flash Hider, Factory New $7.95 Requires a crush washer for proper indexing, available seperately. |
*
| AR-15 / M16 Bolt Parts |
|
AR15 Firing Pin, New $5.50 AR-FP |
 AR-15 / M16 Firing Pin Retaining Pin $1.25 AR-1001 |
*
| Troy Industries Battle Rail Covers |
 Black 3" Battle Rail Covers installed on a AR15 SBR |
 Battle Rail Covers, 3 inch, Black, 3-pack $20.00 BRC-3inch-BLK |
 Battle Rail Covers, Full Size Carbine, Coyote Tan $20.00 BRC-FS-COY |
*
| Troy Sling Mount Accessories |
 Shown Mounted on a CAR-15 Quadrail.  Troy M1913 Sling Mount $25.00 Troy-M1913 Mount |
*
| M16 Accessories |
|
Cherokee Products CAR-15/16 M4 Cheekpiece. Only fits the late "ribbed" M4 collapsible stocks. Snaps on instantly and is in use by Police and Military world-wide. Storage compartment in the rear. $26.50 each Part Number AR-CP-AP4 |
|
AR-15
Brass Deflector, A4 Flat-Top uppers. Drops valuable brass at your feet
for easy recovery. CMP approved and NRA allowed for Match use.
Condition is new $24.95 each |
|
AR-15
Brass Deflector, A2 Carry Handle uppers. Drops valuable brass at your
feet for easy recovery. CMP approved and NRA allowed for Match use.
Condition is new $24.95 each AR-CH-Deflector |
*
AR-15 / M16 Front Sling Swivel Parts |
 AR-15 Front Sling Swivel, New $3.95 each AR-1002 |
 AR-15 Front sling swivel rivet, new $1.25 each AR-1003 |
*
|
Individual peel and stick decals. All-weather decals that stick to any smooth or semi smooth surface. Use them on auto windows, gun safes, garage doors, toolboxes, military crates, etc. These are abailable in Black and White and in two sizes. Large size Ordnance Emblems measure 5.25"w x 6.25"h Large size Flaming Bomb measures 6.75"w x 6.25"h Small size Ordnance Emblem measures 3.5"w x 4.5"h Small size Flaming Bomb measures 5"w x 4.5"h |
*
Full Sized Ordnance Emblem, Black. $6.95 |
*
Full Sized Ordnance Emblem, White. $6.95 |
*
Small Sized Ordnance Emblem, Black $5.95 |
*
Small Sized Ordnance Elblem, White $5.95 |
*
| Large Size Flaming Bomb, Black $6.95 |
*
| Large Size Flaming Bomb, White $6.95 |
*
| Small size Flaming Bomb, Black $5.95 |
*
| Small Size Flaming bomb, White $5.95 |
*
AR15 Ejection Cover hinge pin, new. $1.25 |
*
AR15 Hand-guard removal tool, new. $15.95 |
*
|
Individual peel and stick decals. All-weather decals that stick to any smooth or semi smooth surface. Use them on auto windows, gun safes, garage doors, toolboxes, military crates, etc. These are abailable in Black and White and in two sizes. Large size Ordnance Emblems measure 5.25"w x 6.25"h Large size Flaming Bomb measures 6.75"w x 6.25"h Small size Ordnance Emblem measures 3.5"w x 4.5"h Small size Flaming Bomb measures 5"w x 4.5"h BLACK Decals: Ordnance Emblem, Large $6.95 Ordnance Emblem, Small $5.95 Flaming Bomb, Large $6.95 Flaming Bomb, Small $5.95 WHITE Decals: Ordnance Emblem, Large $6.95 Ordnance Emblem, Small $5.95 Flaming Bomb, Large $6.95 Flaming Bomb, Small $5.95 |
*